universal-mills (1)

Junior Series Premium Universal Mills :

These MILLS have small diameter ranging from 160mm, to300mm.

These MILLS have either FEED TRY or FEED HOPPER and are mounted on CABINET or stand. A provision for AIR BALOON is provided for AIR to ESCAPE. LAB MODELS are usually CABINET MOUNTED and PRODUCTION MODELS are mounted on RECTANGULAR STAND. These models are mounted on RECTANGULAR STAND. These models are mounted on RECTANGULAR STAND. These models are BOTTOM OPEN TYPE (B.O.T) and Blast Rotor and CLASSIFIER STATOR can be given in S.S. Construction. Technical Specification of these models is as under

Technical Specifications :

Screenshot (756)

Senior Series Premium Universal Mills 

These mills are in BIGGER DIAMETER ranging from 500 mm to 1000 mm, H.P of MAIN MOTOR will depend upon model, capacity, Fineness of END PRODUCT and type of material.

These MILLS are provided with SCREW FEEDER for uniform and regulated flow and are suitable either for MECHANICAL DISCHARGE / CONVEYEYING or PNEUMATIC COLLECTOR and AIR LOCK is provided For DUSTY and pungent material reverse Pulse Air Jet Dust Collector and aspiration System is recommended Technical Specification are as under


senior-series-premium-universal-mills

Technical Specifications :


Screenshot (757)

Specification and design are subject to change without notice for any additional improvement

pulse-air-jet-dust-collector

Pulse Air Jet Dust Collector


mill-with-bag-filter-air-relief-system

Mill With Bag Filter Air Relief System


mill-with-pneumatic-conveying-systems

Mill With Pneumatic Conveying Systems


cross-section-of-universal-mill-with-screw-feeder

Cross Section Of Universal Mill With Screw Feeder



Blast Rotors :

A. Bar Type Blast Rotor :

Premium Universal Mills Are Provided With Bar Type Blast Rotors. The Bars Are Either Straight Bars Or Inclined Bars. The Speed Of Blast Rotor, Type Of Bars Will Decide Fineness Of End Products. As Shown In The Picture Bars Are Fitted In Rotor End Discs And Are Firmly Locked.

B. Plate Type Blast Rotor :

The Blast Rotor Is Same But The Grinding Tools Are In The Shape Of Plates As Shown In The Picture Beside The Speed And Classifier Screen Size Of Hole The Distance Between Outer Edge Of Blast Rotor And Classifier Screen Drum Will Beside The Fineness Of End Product.

blast-rotors

Classifier Stators :

C. Full Screen Classifier Stator:

This Is Full Screen Drum. Screen Is Fixed Between Two Rings And Bars Are Screwed On End Rings To Reinforce And Support The Screen. The Size Of Screen Is Selected As Per Requirement Of Fineness.

D. Screen Cum Track Stator:

This Has Screen Of Required Hole Size And Grinding Tracks (Seratted Segments). The Portion Of Such Tracks Is Decided Upon The Fineness Of End Product And Type Of Product.

classifier-stators

Technical Information:

This Is a Very Common And Standard Mill For Grinding Many Materials. The Grinding is effected in a highly turbulent air, Starting From inside edge and ending on the out side edge of the grinding bars. Because of air intake and circulation during grinding the Material does not get Heated. The Turbulent air carries the fines through the Sieve Opening. The mill Has Stator and Rotor. The Rotor is Perfectly balanced. The Stator is in drum Form and has both Liners which grind the Material and Sieve Which Permit The Pulverized Particles to escape out of Grinding Chambers. The Material Fed in The Center And Discharged is from Periphery. By Varying the r.p.m. of rotor and feed rate fineness and out put are controlled.

universal-mills-1

Popular Application :

Ayurvedic products
Bakelite Sodium
Alginate
Besan
Carbon Powder
Casein
Ceramic Powder
Ceramic Colour
Chemical & Dye Stuff
Coal
Confectioneries
Ferrous sulphate
Fertilizers
Food stuffs & Gram Flour
Guar Gum
H.Acid
Insecticides and Pesticides
Isabgol
Metallic compound
Naphthalene
Nilgiri





















Ores & Minerals
Oyster Shells
Paints &
Pigments
Pharmaceuticals
Plastic Films
Resin
Salt
Saw Dust
Sea Food
Sintered PVC
Sodium
Alginate
Soft Metals
Spices
Starch
Sugar
Tea
Textile
Turmeric